x
Send Your Inquiry Today

How to Install a Paddle Switch

How to Wire a KEDU HY56 Switch

Welcome to this comprehensive guide on how to install a paddle switch. Ensuring correct installation is essential for the safe and efficient operation of your electrical systems. This article will provide clear, step-by-step instructions, covering everything from the necessary tools and materials to the final testing phase. Whether you’re a seasoned professional or a novice, we aim to assist you in serving others through the effective installation of paddle switches. Let’s begin our journey to a successful installation.

Contents hide

Introduction

In the following section, we will provide a comprehensive understanding of a paddle switch, discussing its fundamental nature and purpose. As an integral part of any electrical system, its correct installation is crucial to ensure both safety and optimal functionality. We will explore the importance of these factors in detail, providing a solid foundation for our subsequent discourse on the installation procedure.

What a paddle switch is

Before delving into the installation process, it’s crucial to spend a few moments understanding what a paddle switch is. A paddle switch, as produced by the weup paddle switch manufacturer and other paddle switch China manufacturers, is a type of switch characterized by its wide, flat actuator, or “paddle”. It comes in two main varieties: the single-pole switch and the three-way switch. A single-pole switch controls a single circuit, while a three-way switch can control one light or receptacle from two different locations. These switches are extensively used due to their ease of operation and versatile application. Understanding the functionality of a paddle switch aids in better serving others by ensuring safe and correct installation.

Importance of proper installation for safety and functionality

Proper installation of a paddle switch, a critical safety measure, ensures not only the prevention of electrical hazards but also the effective performance of the device in controlling circuits. This is particularly true for the Weup paddle switch, a product of a renowned paddle switch manufacturer known for its superior quality and reliability.

  • Importance of proper installation for safety and functionality
  • Paddle switch installation techniques to adhere to
  • Connection of the paddle switch to the power source
  • Ground wire connection and its significance

The connection to the power source and the grounding wire is crucial for the switch’s functionality and the safety of the users. Therefore, the importance of proper installation cannot be overstated. It ensures that the device performs optimally and keeps the users safe from potential electrical hazards.

Tools and Materials

In Section 2: Tools and Materials, we will outline the essential tools and materials needed for the installation of a paddle switch. Point 2.1 will enumerate the specific tools required, ensuring you are well-equipped for the task. Furthermore, in Point 2.2, we will identify the necessary materials that will contribute to a successful and efficient installation process.

The tools required for the installation

The screwdriver, wire strippers, and voltage tester are among the essential tools needed for the installation of the paddle switch. These tools, sourced from a reliable paddle switch supplier, not only ensure a smooth installation process but also guarantee optimal performance and safety.

The following list details the necessary tools:

  • Screwdriver: Essential for connecting electrical screw connectors, and securing the paddle switch in place.
  • Wire Strippers: Required for removing the insulation from the wires, ensuring a pure electrical connection.
  • Voltage Tester: Crucial for verifying the presence or absence of electrical current.
  • Wire Cutter: Used for resizing the wires to fit the paddle switch.

Necessary materials for a successful installation

While the right tools are vital for a successful installation, it is equally important to have high-quality materials including the correct wires, connectors, and the paddle switch itself. Your paddle switch factory or paddle switch wholesale vendors should provide you with comprehensive lists of necessary materials. Below is a table highlighting some crucial elements:

MaterialDescription
Paddle SwitchAcquired from paddle switch vendors
Switch BoxEncloses the switch mechanism
Terminal ScrewSecures wires to the switch
Wire ConnectorJoins wires together

Pre-Installation Steps

In section 3, the pre-installation steps for setting up a paddle switch are discussed. The first step involves deciding on the exact location for the switch. The second is to verify that the existing electrical circuit can adequately support the new paddle switch.

Determine the location for the paddle switch

Before we proceed with the installation, we need to decide on the most suitable location for the paddle switch. Determining the location is a crucial step as it directly influences the convenience of usage and the aesthetics of the installation.

Consider the following when deciding the location:

  • The proximity to the device that the paddle switch is intended to control.
  • The height from the floor to the switch ensures it is easily reachable.
  • The presence of a wall box to house the switch box wiring securely.
  • The space required for the switch cutout ensures that it does not interfere with other fixtures.

Check if the electrical circuit supports the switch

Ensure that the electrical circuit can accommodate the paddle switch by reviewing its voltage and current ratings. This is a crucial step before installation to ensure the switch will function properly and safely. Remember, serving others starts with ensuring their safety.

To simplify this process, consider the following table:

Electrical Circuit ParameterPaddle Switch RequirementCheck
Voltage RatingSuitable for the switchVerify
Current RatingSupports the switchConfirm
CompatibilityFits the switchCheck

Shutting Off Power

In Section 4, we will discuss the crucial step of shutting off power before installing a paddle switch. First, we will outline the safety precautions one must take when dealing with electricity. Following that, we will guide you on how to locate and turn off the specific circuit breaker, and verify the absence of power using a voltage tester.

Safety precautions before working with electricity

Eight fundamental precautions should be observed before initiating any electrical work to ensure the utmost safety. The inherent risks of dealing with electrical power demand a rigorous approach to safety precautions before working with electricity.

  • Always disconnect the power supply at the circuit breaker before starting any electrical job. This simple step is paramount to prevent any accidental electrical shocks.
  • Confirm the circuit is off by using a voltage tester.
  • Always connect the ground terminal to an insulated ground wire. This provides a safe path for any stray electrical current.
  • Never assume that a wire is safe to touch even if it’s disconnected from the power supply. Always treat every wire as if it’s live.

Locate and turn off the circuit breaker for the specific area

Before you proceed with the installation, you need to locate the specific circuit breaker for the area where you are working and turn it off, ensuring your safety throughout the project. The circuit breaker box houses all your power access points, and identifying the correct circuit breaker is vital. This how-to step serves to prevent accidental interaction with an un-switched circuit, a situation that could be potentially hazardous. Once you’ve located the correct circuit breaker, turn it off to safely install the paddle switch. This action disconnects the power access, minimizing risk while you perform your service. By following these steps, you ensure not only your safety but also the integrity of your work, embodying the spirit of serving others with diligence and care.

Use a voltage tester to ensure no power is flowing to the switch

Utilizing a reliable voltage tester, ensure that no electrical current is flowing to the paddle switch. This step is crucial to prevent any electrical accidents during the installation process. Safety should always be the priority when dealing with electrical equipment.

Here are some steps to follow:

  • First, place the voltage tester near the paddle switch to detect if the power is still flowing.
  • If the voltage tester lights up or beeps, power is still present. Go back and make sure the correct circuit breaker has been turned off.
  • Once the voltage tester indicates no power, proceed with the installation process.
  • Remember to always double-check with the voltage tester to ensure no power is present.

Removing the Old Switch (if applicable)

In Section 5, we will address the removal of the old switch, if present. We will first elaborate on the various types of switches and their respective methods of removal. Following this, we will provide a comprehensive, step-by-step protocol to safely disconnect and remove the old switch.

Different types of switches and their removal methods

Concerning the removal methods of different types of switches, it’s important to first ensure that the power is turned off at the breaker to prevent any electrical accidents. The process of removal and installation can vary depending on the type of switch.

  • Paddle switches often have screws at their top and bottom which can be unscrewed for removal.
  • Traditional toggle switches may require a careful prying action.
  • Dimmer switches often have a faceplate that needs to be removed first.
  • For more complex switch types, it’s advisable to refer to manufacturer instructions.

These removal methods are important knowledge for those interested in light switch replacement projects. Proper switch wiring understanding is also crucial for the safe installation of a new paddle switch.

A step-by-step guide to safely disconnect and remove the old switch

Before proceeding with the step-by-step guide to safely disconnect and remove the old switch, it is critical to bear in mind that this should be done after turning off the power at the breaker to avoid any potential electrical hazards.

The table below provides a clear visual representation of the process to safely disconnect and remove an old switch in preparation for installing a new paddle switch:

StepsActionSafety Measures
Step 1Turn off the power at the breakerPrevents electrical hazards
Step 2Unscrew and remove the old switchCareful handling of the switch
Step 3Disconnect wires from the old switchAvoid touching bare wires
Step 4Safely dispose of the old switchComply with local electronic waste regulations

This guide is intended to serve those who wish to perform this task themselves, safely and effectively.

Understanding the Wiring

In Section 6, we will be exploring the various types of wiring configurations, specifically focusing on single-pole and three-way setups. This understanding is significant for the proper installation of a paddle switch. Further, we will also learn how to identify the existing wiring setup in the switch box, which will lay the groundwork for the switch installation process.
KEDU HY56 switch wiring diagram

Different types of wiring configurations (single-pole, three-way

Interestingly, single-pole and three-way are two common types of wiring configurations used in the installation of a paddle switch. When serving others, it’s important to understand the different wiring configurations to ensure a safe and successful installation.

  • Single-pole: This configuration uses two types of wires and is typically used for simple on/off switching.
  • Three-way: This type of wiring configuration utilizes three types of wires and allows for control from two different locations.
  • Paddle switch: This is a user-friendly switch design that is easy to operate, and often used in modern decor.
  • Install Proper installation of the paddle switch, whether single-pole or three-way, is critical to the switch’s functionality and safety.

Knowing these terms and their applications can greatly enhance your service to others.

Identifying the existing wiring setup

The first step towards a successful paddle switch installation is identifying the existing wiring setup to ensure compatibility and safety. This process involves examining wire connections, paying special attention to the switch terminals and ground screw terminal. Depending on the existing wiring setup, the installation process for your paddle switch may vary. It is crucial to understand the wiring configuration to avoid any potential issues and ensure a smooth installation process. Proper identification of the existing wiring setup serves as the foundation for a successful paddle switch installation. Remember, safely installing a paddle switch isn’t just about making the correct wire connections. It’s about serving others by providing a safe and efficient solution to their lighting needs.

Preparing the Paddle Switch

In section 7, we will be focusing on the preparation of the paddle switch, an essential step in the installation process. This involves familiarizing oneself with various components of the paddle switch as outlined in point 7.1. We will also discuss how to adjust the switch for either a single-pole or a three-way configuration, as described in point 7.2.

Familiarizing yourself with the different components of a paddle switch

Understanding the various components of a paddle switch, such as the actuator, terminal, and housing, is crucial for effective and safe installation. Familiarizing oneself with these elements before beginning the installation process can ensure a successful operation and minimize potential issues.

The paddle switch has four main components:

  • The actuator: This is the part you physically flip to turn the switch on and off.
  • The terminal: Also known as screw terminals, these are where the wires connect to the switch.
  • The housing: This protective casing houses the switch body and other components.
  • The switch body: This is the heart of the paddle switch, housing the electrical contacts that open and close.

Understanding these components can help you serve your clients better by ensuring a safe and effective paddle switch installation.

Adjusting the switch for single-pole or three-way configuration

Before proceeding to the installation, one should determine whether a single-pole or a three-way configuration is required for the paddle switch. This preliminary step is crucial in serving the needs of others, as it ensures the switch functions optimally. A single-pole switch controls one fixture from a single location, while a three-way configuration allows control from two locations. The installation process varies slightly for each, making it essential to ascertain the correct setup beforehand.

When adjusting the paddle switch, remember that the single-pole setup is more straightforward, and the three-way configuration requires additional wiring. Both configurations, however, serve to enhance user convenience and safety. Hence, understanding these configurations is fundamental to successfully install a paddle switch.

Wiring the Paddle Switch

In Section 8: Wiring the Paddle Switch, we will focus on identifying the different wires and understanding their specific functions. This section will also cover the process of connecting these wires to the appropriate terminals, ensuring the switch is properly grounded, and securing connections with wire nuts and electrical tape. Understanding these steps is crucial to ensure the safe and proper functioning of the paddle switch.
KEDU HY56 switch wiring diagram

Identify the different wires and their functions

There are typically three wires to identify when installing a paddle switch: the live wire, the neutral wire, and the ground wire, each with its unique function in ensuring a safe and effective connection. Understanding these wires is crucial in serving others with installation guidance.

In this article section, let’s delve into the functions of these different wires:

  • The live wire is responsible for supplying power from the circuit to the paddle switch.
  • The neutral wire completes the circuit, allowing the current to return to the power source.
  • The ground wire provides a safe path for electricity to follow in case of a fault, preventing electric shock.
  • Lastly, when installing a paddle switch, always turn off the power supply to ensure safety.

Connecting the wires to the appropriate terminals

Why is it crucial to connect the live, neutral, and ground wires to their respective terminals on the paddle switch? Proper wire connection ensures safety and functionality. Incorrectly connecting the wires to inappropriate terminals may cause electrical hazards, resulting in equipment damage or personal injury. When you install the paddle switch, it’s vital to match each wire to its designated terminal: live, neutral, and ground. The paddle switch design usually incorporates color-coded terminals to assist with the correct connection.

Ensuring the appropriate connection of wires is not only essential for the switch to operate correctly, but it’s also a vital step in serving others by providing a safe and reliable environment. The process of connecting the wires correctly reflects our commitment to quality, safety, and service.

Properly grounding the switch

Ensure you properly ground the paddle switch to prevent electrical shocks, and always double-check your connections for accuracy and safety. It’s crucial to connect the green grounding wire to the ground screw. Remember, grounding is a significant part of switch installation techniques that safeguards users from potential hazards.

Consider these steps:

  • Identify the grounding wire, usually green or bare.
  • Connect the grounding wire to the ground screw on the paddle switch.
  • Securely fasten the paddle switch to the box.
  • Attach the wall plate to the paddle switch.

These steps are designed to instill a sense of service towards others by promoting safety. Conducting a proper grounding process ensures everyone’s safety while operating the paddle switch. Always prioritize safety in your installation practices.

Use wire nuts and electrical tape for secure connections

Applying wire nuts and electrical tape can significantly enhance the security of your paddle switch connections, fostering a robust installation process. These tools ensure your wiring switches maintain secure connections, reducing potential risks associated with loose or exposed wires. Wire nuts, in particular, are instrumental in safely binding together the wires involved in the installation of a paddle switch. Following this, the use of electrical tape further secures these connections, providing additional insulation and preventing the likelihood of electrical short circuits. This method not only promotes safety but also enhances the longevity of the paddle switch. In essence, the use of wire nuts and electrical tape is an integral part of the paddle switch installation process, demonstrating a commitment to serving others by ensuring safe and secure electrical connections.

Mounting the Paddle Switch

In Section 9, the focus shifts to the critical process of mounting the paddle switch. Initially, the discussion will center on how to position the switch correctly in the electrical box (9.1), before moving to the selection of an appropriate location on the wall for the switch (9.2). The final portion of this section will advise on securing the switch using screws or other provided methods (9.3).

Positioning the switch in the electrical box

Carefully line up the paddle switch with the electrical box before you screw it in, taking into account its alignment with the faceplate. This step is crucial for the final positioning of the switch and to avoid any complications during its use.

As a responsible server to others, this article aims to guide you effortlessly to install the paddle switch. Here are your four key steps:

  • Ensure the power source is turned off before proceeding.
  • Align the switch carefully with the electrical box.
  • Verify the positioning; it should be in line with the faceplate.
  • Securely screw in the paddle switch into the electrical box.

Choose a suitable location on the wall for the switch

While securing the paddle switch, it is crucial to choose a suitable location on the wall, as this will affect the ease of access and overall functionality of the switch. This article aims to guide you through the process of installing a switch in a location that not only enhances its usability but also complements the room’s design. The wall location should be at a comfortable height for all users and away from any possible obstructions. It’s also important to consider the proximity to the device or appliance the switch will control. Lastly, ensure the paddle switch is installed in a dry, safe area to avoid any electrical hazards. Remember, a suitable location is the cornerstone of an efficient switch installation.

Securing the switch using screws or other provided methods

The manufacturer’s instructions often provide detailed steps on how to secure the switch using screws or other included components, ensuring a firm and secure installation. The process of securing the paddle switch includes various methods, such as screws and other provided methods, to ensure a comprehensive installation.

  • Understanding the manufacturer’s instructions
  • Properly aligning the paddle switch
  • Using screws efficiently
  • Checking the installation for stability

These steps are designed to guide you through the process, serving you a clear path towards a successful installation. The emphasis is not just on securing the switch, but also on ensuring every part, including screws, are utilized correctly. So, follow these steps, and you’ll have a well-secured paddle switch in no time.

Testing and Finalizing

In Section 10, we will focus on testing and finalizing the installation of the paddle switch. This entails powering up the circuit, verifying the operational efficiency of the paddle switch, and making certain all connections are secure with no loose wires. This final stage is crucial as it confirms the successful installation and safe operation of the switch.

Turn on the power from the circuit

After carefully inspecting all the connections, it’s essential to turn on the power from the circuit to check if the paddle switch operates as expected. This article section will guide you through the process of checking the function of your newly installed paddle switch.

  • Ensure that the circuit power is off before you begin the installation.
  • Make sure all connections are secure and accurately connected.
  • After installation, turn on the circuit power to verify the paddle switch’s functionality.
  • If the paddle switch doesn’t operate as expected, disconnect the power and recheck the connections.

This procedure is critical to ensure the safety and effectiveness of your paddle switch install. Your dedicated service to others relies on mastering these crucial steps.

Test the paddle switch for proper functionality

For the successful completion of this installation, you must test the paddle switch for proper functionality, and if any faults are detected, troubleshooting should be initiated immediately. This ensures that the switch controls are operating correctly, which is a crucial step in providing optimal service.

While installing a paddle switch, it is mandatory to verify its proper functionality. This involves a thorough test of the switch model to confirm it functions as intended. If the paddle switch doesn’t respond or function as expected, instant troubleshooting is required. Remember, the main aim is to serve others with efficiency. Installing a paddle switch with precise functionality is key to achieving this goal. Therefore, the testing phase should not be bypassed or taken lightly in the installation process.

Ensure all connections are secure and there are no loose wires

While finalizing the paddle switch installation, ensure all connections are securely fastened and check diligently for any loose wires, as this could compromise the switch’s functionality. This is paramount in obtaining the desired result and ensuring the safety of all users.

Follow these steps to ensure a successful installation:

  • Inspect all connections for firmness; do not proceed to the next step if any connection is insecure.
  • Look for any loose wires; these are potential hazards and could negatively affect the operation of the paddle switch.
  • Recheck all connections after the installation is complete; this is for added safety and assurance.
  • Test the paddle switch to ensure it is functioning correctly; if it fails, reevaluate the connections and secure any loose wires.

Conclusion

In the concluding section, we will present a succinct summary of the installation process. This will serve as a quick reference guide for future installations. Additionally, we will share some useful tips to ensure a successful and efficient installation.

The installation process

Where did you encounter difficulties during the paddle switch installation process discussed in our recap? Often, electricians or DIY enthusiasts face challenges in this process. These issues could hamper the effectiveness of the switch and even pose safety risks.

  • Identifying and properly connecting the wires can be tricky, especially when dealing with multiple switches.
  • Ensuring the paddle switch fits correctly within the switch plate can also be a challenge.
  • Replacing a traditional switch with a paddle switch may require adjustments to the screwless wall plate.
  • Lastly, the handling of electrical components always carries a risk of electrical shock if not done cautiously.

Additional tips for a successful installation

Both understanding the wiring process and using the proper tools are essential for a successful paddle switch installation, thus we will now provide some additional tips to ensure a smooth and efficient process. It’s vital to start with the correct light switch installation techniques. The first tip is to ensure the power supply is disconnected before proceeding. This is a critical safety measure. The next tip is to use precision tools for the removal and installation of wires, avoiding any potential damage. For a successful installation, consider a rocker switch upgrade. This allows for easier usage and increased longevity. Always double-check your connections before restoring the power. Following these additional tips will make your paddle switch installation effective and safe.

Frequently Asked Questions (FAQs)

In Section 12: Frequently Asked Questions (FAQs), we aim to address common queries regarding the installation of paddle switches. From understanding the time required for installation to the appropriate tools needed, we will clarify these aspects for your benefit. Additionally, we will discuss whether professional assistance is necessary, how to handle potential issues during installation, and crucial safety measures to consider.

How long does it take to install a paddle switch?

The duration of a paddle switch installation largely depends on the individual’s level of experience and familiarity with electrical systems. For a seasoned technician, the process may take as little as 30 minutes. However, for someone with minimal experience, it could take up to a few hours.

The installation process typically involves the following steps:

  • Switch off the power from the main switchboard.
  • Remove the old switch and disconnect the wires.
  • Connect the new paddle switch using a screw for connection.
  • Secure the wires with tape to ensure safety.

It’s crucial to remember that while the process may seem straightforward, working with electrical systems can be dangerous. Therefore, if you’re unsure, it’s always best to hire a professional.

Do I need any special tools for installing a paddle switch?

While it is crucial to have a basic tool kit for any DIY project, you will specifically require a screwdriver and wire strippers when installing a paddle switch. These special tools ensure a secure installation, serving to create a safe environment for all. The process involves removing the switch with the cover plate, disconnecting the wires from the brass terminals, and then connecting the new paddle switch. This is where the wire nut comes in handy to securely fasten the wires. Finally, you replace the switch with the cover plate. Remember, proper installation of a paddle switch is not just about functionality but also about serving others by maintaining a safe and risk-free environment.

Can I install a paddle switch on my own or should I hire a professional?

Considering one’s level of familiarity with electrical installations, it is possible to carry out the installation of a paddle switch independently, although some may prefer to hire a professional to ensure the job is done correctly.

The decision to install your own paddle switch or hire a professional depends on several factors:

  • Your level of experience with electrical installations
  • Availability of the required tools
  • Understanding of safety procedures
  • Willingness to take the time to learn and perform the task

In this article section, we emphasize that while self-installation can be rewarding, ensuring safety and proper functioning by hiring a professional is often a wise choice. Ultimately, the decision is yours to make based on your comfort level and circumstances.

What should I do if I encounter any issues during the installation process?

Should you face any challenges during the installation process, how will you determine whether to troubleshoot on your own or seek professional assistance and what criteria will guide this decision? The answer lies in the complexity of the issue encountered. If the paddle switch doesn’t respond after installation or shows minor malfunctions, you may resolve it by referring to the how-to guides in this article section. However, if you encounter issues that are beyond your technical know-how such as electrical faults, seeking professional aid is advised. Remember, the aim of the installation process is not just to get the paddle switch working, but to ensure it is safely and correctly installed. Your safety and the effective functioning of the paddle switch should always be the primary concern.

Are there any safety precautions I need to be aware of when installing a paddle switch?

There are indeed several safety precautions to consider when installing a paddle switch, and these include but are not limited to ensuring the power supply is disconnected, using appropriate tools, and following the manufacturer’s guidelines meticulously. As servants to the community, we must prioritize safety above all, not just for our wholesale customers but for anyone involved in the installation process.

  • Always disconnect the power supply before starting the installation.
  • Use tools that are factory-approved.
  • Follow the guidelines provided by the paddle switch suppliers meticulously.
  • Always conduct a final check to ensure all connections are secure.

Can I replace an existing switch with a paddle switch without rewiring?

The replacement of an existing switch with a paddle switch without rewiring is indeed possible, provided that the current switch wiring aligns with the requirements of the new paddle switch. Our commitment to serve others is reflected in our endeavors to simplify the installation process. The paddle switch is designed to accommodate the wiring of most existing switches, making light switch replacement a straightforward task. If you’re seeking to replace an older switch, ensure that the wiring is compatible with your new paddle switch. In some instances, minor adjustments might be necessary. However, the overall process of rewiring is generally not required. Remember, for a successful install, understanding the wiring requirements of the paddle switch is key.

Author

Hello, my name is Eva Xia, and I am currently the Marketing Manager at Yueqing Weup Technology Co., Ltd, located in Wenzhou, Zhejiang, China. With over a decade of experience in the accounting field, I have developed extensive knowledge and skills that enable me to excel in my role. Additionally, I have spent two years working as an English teacher, which enhanced my communication abilities and instilled discipline within me.

Having gained more than three years of valuable experience in overseas sales, I have had the opportunity to expand my horizons and develop a deeper understanding of the commercial landscape. This exposure has nurtured my business understanding and allowed me to navigate diverse markets confidently.

However, despite my accomplishments thus far, I remain dedicated to continuous growth and learning. My current area of focus revolves around electronic switches. It is a fascinating and dynamic field that constantly evolves with technological advancements. By delving deeper into this realm, I aim to enhance my professional knowledge and stay ahead of industry trends.

In summary, as a Marketing Manager at Yueqing Weup Technology Co., Ltd., I bring forth a wealth of experience in accounting coupled with the valuable skills honed during my time as an English teacher. Furthermore, my extensive overseas sales expertise has sharpened my business acumen. With a relentless thirst for knowledge and a specific interest in electronic switches, I strive to enhance my professional capabilities further while contributing positively to our organization’s success.

Get in Touch for More Insights!

If you’ve found the information helpful and want to learn more, I encourage you to reach out. Whether your questions concern our latest industry trends, electronic switches, or other market insights, I’m here to help!

Don’t hesitate to drop me an email at the below table.

I am looking forward to hearing from you soon!

Eva Xia,
Marketing Manager at Yueqing Weup Technology Co., Ltd

Update cookies preferences
Scroll to Top